EU ship DM500 3 Axis / 4 Axis 500Khz Handwheel Motion Controller G code For Engraving Machine replace DSP A11E 23 User's keys

EU ship DM500 3 Axis / 4 Axis 500Khz Handwheel Motion Controller G code For Engraving Machine replace DSP A11E 23 User's keys
  • Продавецthestraightway.info
  • Список ценUS $180.01piece
  • Продажная ценаUS $180.01piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,2 (982)

Oписание продукта

Description:
1.Support for 4-axis linkage, you can connect four stepper motor drives or servo drives
2.Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor
3.4 general-purpose opto-couplers isolation input : can connect the limit switch, emergency stop switch, auto tool zero, home switch etc
4.Support for connecting electronic handwheel
5.Have 0-10V signal output , you can use mach3 software to control the spindle motor speed
6.4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device
7.1 status LED, indicate connection status on the board
8.Resolution 1.1\\2.1\\8.1\\16 micro stepping output
9.Four(or three) channles 3.5A adjustable output current for 2/4 phase bipolar stepper driver
10.Bulid with 4 outputs and 5 inputs

Size: 14.5x17.5cm/5.71x6.89inch
Quantity: 1 Set
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!